How to Ping a Website/IP Address in CMD

Instructions Open the computer's command prompt. Open the "Start" menu, click on "All Programs," then click on "Accessories" and finally click on "Command Prompt." If you see a black box with a blinking cursor, you have successfully opened the command prompt. Run the ping command. Type "ping," then a single space and then the name of any website or IP address. It is not necessary to include "http://" at the beginning of the address, but you should include the "www" portion of the address. A good ping command should read as follows: "ping www.example.com" Check for any typing errors and press the "Enter" key. Evaluate the ping. If it is unable to ping the server, the output will read "ping request could not find host." If the command pings the server successfully, the output will look like this: Pinging www.l.example.com [12.34.567.890] with 32 bytes of data: __ Reply from 12.34.567.890: bytes=32 time=41ms TTL=54 Reply from 12.34.567.890: bytes=32 time=40ms TTL=54 Reply from 12.34.567.890: bytes=32 time=39ms TTL=54 Reply from 12.34.567.890: bytes=32 time=39ms TTL=54 __ Ping statistics for 12.34.567.890: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 39ms, Maximum = 41ms, Average = 39ms The key part of the output is the "ping statistics" section at the bottom. A standard Windows ping command sends out four packets of information. The statistics tell you how many of the packets wer

Windows Cloud VPS Keep's Shutting Down Every Hour

If your Windows Cloud VPS is shutting down every hour, you may want to check if your Windows Cloud VPS is connecting to our licensing server. <hr /> To conduct this check, follow these instructions. 1.) Open the Windows Application logs and looking at the time the server SHUTDOWN. You'll notice under the Source category WLMS and under the Event ID category 100. If you have the same error as below please open a support ticket, so we could link your VPS to our licensing server once again. <img src="https://storage.crisp.chat/users/helpdesk/website/5f2a19a717c44000/image411_snf2om.png" alt="" />

When it comes to shared hosting, we have to be really careful on what scripts we host. Many forum scripts, much like Vbulletin are very heavy and may cause alot of damage towards shared servers if not handled properly. Below are a few lcoations you can toggle with to lower the load caused by the servers. Admin CP -> vBulletin Options -> General Settings -> Thread/Forum Read Marking Type Admin CP -> vBulletin Options -> Forum Display Options (forumdisplay) -> Show Users Browsing Forums Admin CP -> vBulletin Options -> Forums Home Page Options -> Display Logged in Users? Admin CP -> vBulletin Options -> Message Searching Options -> Search Engine Enabled Admin CP -> vBulletin Options -> Email Options -> Use Mailqueue System Admin CP -> vBulletin Options -> Server Settings and Optimization Options -> Update Thread / Attachment Views Immediately Admin CP -> vBulletin Options -> Plugin/Hook System -> Enable Plugin/Hook System

Frequently Read Articles

How to Ping a Website/IP Address in CMD
Windows Cloud VPS Keep's Shutting Down Every Hour
Vbulletin High CPU

Browse All Categories

No imageNetworkingNo description
No imagePerformance/LoadNo description
No imageVirtual Private ServersNo description